What to do if there is insufficient powder in the KaVo Dental equipment?
If you find there's an insufficient amount of powder in the container of your KaVo dental equipment, make sure to fill the powder container to at least 20%. Ideally, the powder container should be half-filled, which is approximately 20 grams.
What to do if I am working on overly large carious lesions with KaVo Dental equipment?
If you are working on overly large carious lesions with your KaVo dental equipment, it might not work well because the soft carious material dissipates the kinetic energy of the powder particles. Abrade the carious lesion ahead of time using a conventional technique.
How to improve abrasion performance of KaVo Dental equipment?
If you're experiencing lesser abrasion performance with your KaVo dental equipment due to a large distance from the tooth surface, maintain a working distance of 1 mm.
General| Connection | MULTIflex coupling |
|---|---|
| Abrasive | Aluminum oxide |
| Compatibility | KaVo MULTIflex couplings |
| Rotation | 360 degrees |
| Sterilization | Autoclavable up to 135°C |
| Power supply | Pneumatic |
| Material | Stainless steel and plastic |
Explains symbols used in the manual for clear understanding.
Explains the usage of the warning symbol.
Warns about infection risks from non-sterile devices.
Procedures for preparing the device before use.
To Next Page