What to do if there are leaks in instruments of my KaVo Medical Equipment?
If there are leaks in the instruments of your KaVo Medical Equipment, the O-rings at the MULTIflex or motor coupling, gripping sleeve, or cannula of the triple-function handpiece may be damaged. Replace the O-rings.
What to do if the display shows ID 65 on my KaVo Medical Equipment?
If the display on your KaVo Medical Equipment shows 'ID 65', it means the safety switch of the bowl suction has been reached. Turn the external suction on.
What to do if the display shows ID 66 on my KaVo Medical Equipment?
If the display on your KaVo Medical Equipment shows 'ID 66', it indicates an amalgam separator malfunction. Remedy the malfunction.
What to do if the display shows CAN fail on my KaVo Medical Equipment?
If the display on your KaVo Medical Equipment shows 'CAN fail', it indicates an internal communication error. Turn the unit off and on again.
What does it mean if the LED on the "AP2" button flickers on my KaVo Medical Equipment?
If the LED on the "AP2" button flickers on your KaVo Medical Equipment's assistant element, the data connection to the chair control is faulty.
What to do if an acoustic signal is issued every second on my KaVo Medical Equipment?
If an acoustic signal is issued every second on your KaVo Medical Equipment, it means a leaking water switch recognizes leaking water. Remove water from the unit body.
What to do if the camera image freezes and taking the camera out again did not solve the problem on my KaVo Medical Equipment?
If the camera image freezes on your KaVo Medical Equipment and taking the camera out again doesn't solve the problem, it might be due to electrical or electromagnetic interference from other equipment. Restart the software.
What to do if the spray at the instruments is insufficient on my KaVo Medical Equipment?
If the spray at the instruments is insufficient on your KaVo Medical Equipment, the spray nozzles may be dirty or clogged. Clean the spray nozzles according to the accompanying instrument operating instructions.
What does it mean if ten beeps are issued from my KaVo Medical Equipment?
If your KaVo Medical Equipment issues ten beeps, it indicates that the Oxygenal container is too full. Stop filling the Oxygenal container.
What does it mean if a melody sounds on my KaVo Medical Equipment?
If a melody sounds on your KaVo Medical Equipment, it could mean that the amalgam separator CAS1 is almost full (95%). Exchange the amalgam container. If that doesn't help, the CAS1 amalgam separator might be defective.
Explains warning symbols, structure, and different hazard levels.
Defines intended use, proper operation, and product-specific usage.
Covers general safety, explosion hazards, and specific risks.
Detailed guide on adjusting chair positions, headrests, and safety features.
Guide to navigating menus for various settings like firmware, time, language, and MEMOspeed.
Details on hygiene, light, bell, timer, and saving handpiece settings.
Explains general functions, chair positioning, and instrument control via foot switch.
Details inspection types, test methods, and testing intervals.
Guides on performing measurements, functional tests, and assessment/documentation.
Lists common malfunctions and their causes and remedies.
General| Brand | KaVo |
|---|---|
| Model | Primus 1058 Life TM |
| Category | Medical Equipment |
| Language | English |
To Next Page