What to do if the light of the operating light switches off during treatment and re-starts after approx. 5 seconds on my KaVo Medical Equipment?
If the operating light on your KaVo Medical Equipment switches off during treatment and restarts after about 5 seconds, it's likely due to voltage fluctuations in the supply mains. If the light switches on automatically, no further action is needed.
What to do if the LED on the "HYDROclean" button (red) flashes on my KaVo Medical Equipment?
If the LED on the "HYDROclean" button (red) flashes on your KaVo Medical Equipment, it indicates a malfunction in the amalgam separator.
What to do if the display shows ID 64 on my KaVo Medical Equipment?
If the display on your KaVo Medical Equipment shows 'ID 64', it indicates that the water is shut off. Turn the water on.
What does it mean if ten beeps are issued from my KaVo Medical Equipment?
If your KaVo Medical Equipment issues ten beeps, it indicates that the Oxygenal container is too full. Stop filling the Oxygenal container.
What to do if my KaVo Medical Equipment turbine is making loud running noises?
If your KaVo Medical Equipment turbine is making loud running noises, the turbine wheel may be faulty. Replace the turbine wheels, following the operating instructions for the turbine.
What does it mean if a melody sounds on my KaVo Medical Equipment?
If a melody sounds on your KaVo Medical Equipment, it could mean that the amalgam separator CAS1 is almost full (95%). Exchange the amalgam container. If that doesn't help, the CAS1 amalgam separator might be defective.
Why is there no cold light on the handpieces of my KaVo Medical Equipment?
If there's no cold light on the handpieces of your KaVo Medical Equipment, the high-pressure lamp or Multi LED on the handpiece might be defective. Replace the high-pressure lamp or Multi LED.
What to do if there is no spray in the instruments of my KaVo Medical Equipment?
If there's no spray in the instruments of your KaVo Medical Equipment, first ensure that spray is preselected. Also, check if the ring for controlling the spray on the instruments is closed and open it.
What to do if the patient chair does not move on my KaVo Medical Equipment?
If the patient chair on your KaVo Medical Equipment isn't moving (and the LED on the control panel is flashing), the safety shutoff may be activated. Check the safety shutoff and address the reason for the shutoff.
What to do if KaVo Medical Equipment suction hoses do not have any suction?
If the suction hoses on your KaVo Medical Equipment aren't working, check if the sliders on the conical sections are closed and open them. Also, the sieves in the suction connector could be clogged, so replace them. Finally, make sure the chair kick plate is not being actuated; release it if it is.
General| Brand | KaVo |
|---|---|
| Model | Primus 1058 Life TM |
| Category | Medical Equipment |
| Language | English |
Explains warning symbols, structure, and different hazard levels.
Defines intended use, proper operation, and product-specific usage.
Covers general safety, explosion hazards, and specific risks.
Detailed guide on adjusting chair positions, headrests, and safety features.
Guide to navigating menus for various settings like firmware, time, language, and MEMOspeed.
Details on hygiene, light, bell, timer, and saving handpiece settings.
Explains general functions, chair positioning, and instrument control via foot switch.
Details inspection types, test methods, and testing intervals.
Guides on performing measurements, functional tests, and assessment/documentation.
Lists common malfunctions and their causes and remedies.
To Next Page