KaVo K4 - Installation and Commissioning

K4 Table top controller 4954
5
GB
OPERATING INSTRUCTIONS
A 4 Installation and commissioning
Place the K4 table top controller 4954 #
on the work bench and insert mains plug
£ into the easily accessible, correctly
installed (earthed) mains socket. (This
should also be ensured when using an
extension cable.)
Insert plug of connecting cable fi of hand-
piece Ì in unit socket | and screw tight.
Place foot switch 4622 @ on the floor
under the workplace. Lead connecting
cable ” to the K4 table top controller 4954
# and insert in socket \ at the back.
@
”
|
\
#
£
fi
Ì