KaVo K4 - Operation

GB
OPERATING INSTRUCTIONS
K4 Table top controller 4954
7
A 6 Operation
Only the handpiece £ specially suit-
able for this purpose may be operated
on the K4 controller 4954 @ (
see A 1.6 ).
( For correct operation of the handpiece £
used, it is essential to follow the instruc-
tions for use (1.000.3902) supplied with the
handpiece.
On the K4 controller 4954 @, press mains
switch ” to position “I“ ON.
Preselect desired speed on speed limiter #
from 1000 to 30,000 min
-1
.
By pressing down the foot switch 4622 fi,
put the connected handpiece £ (see A 1.6)
into operation.
”
£
#
@
fi