SPECIFICATIONS
Engine Type Forced air cooled 4-stroke,
horizontal shaft,
OHV gasoline engine
Number of Cylinder 1
Bore x Stroke 60 x 44mm ( 2.36 x 1.73in. )
Piston Displacement 124cm
3
( 7.6cu.in. )
Compression Ratio 8.5 : 1
Maximum Power 3.0kW ( 4.0Hp ) / 3600rpm
Maximum Torque 7.6N-m ( 5.6ft.lbs ) / 2800rpm
Direction of Rotation Counter-clockwise facing the
PTO shaft
Fast Idle Speed 4000rpm
Slow Idle Speed 1600rpm
Fuel Unleaded gasoline
Fuel Tank Capacity 2.5litre ( 2.6US.qt. )
Min. Fuel
335gr / kW-hr ( 250gr / Hp-hr )
Consumption Ratio
Oil Gasoline engine oil SAE10W-30
Oil Capacity 0.6litre ( 0.6US.qt. )
Carburetor Float type with fixed main jet
*Anti-dust & anti-corrosion type
Ignition Flywheel magneto transistor type
Plug NGK BP5ES
*RFI plug is also available
Starter Recoil starter with
Automatic Compression Release
*Electric starter is also available
Governor Mechanical governor
Lubrication Splash with low oil shut-off system
Air Cleaner Dual element
*
Oil bath type is also available
Muffler Low tone type
*
Adjustable deflector is also
available
Lighting Coil *6V-15W is also available
Charging Coil
*
3A is also available
**Dry Weight 14.6kg ( 32.2Ibs )
**Dimension 291 x 349 x 347mm
( L x W x H ) ( 11.46 x 13.74 x 13.66in. )
FE120G 2 : 1 Cam Gear Reduction
Specifications subject to change without notice.
Note : ** Recoil starter and metric straight PTO Shaft.
PERFORMANCE CURVES
OVER HEAD VALVE
CAST - IRON CYLINDER LINER
ADVANCED SPARK TIMING
To Next Page
Need help?
General
