kayse LS30 - Electrical Connections; Basic Wiring Principles; Power Supply Wiring

LS30 CONTROLLER INSTALLATION AND OPERATING GUIDE
7
3. ELECTRICAL CONNECTIONS
3.1 Basic Electrical Connecons
The electricity connecons of device should be made by an au-
thorized electrician. In addion cable connecons should be
maximum 1.5 mm
2
in cross secon. In contrary terminal con-
necons can not be made.
3.2 Supply Voltage Connecons
Energizing of device other than supply voltage tolerances may
severely damage the device. At connecon of devices with 220
VAC measures should be taken against electrical shock.
At devices with 24 VDC supply voltage, the direcons of -/+
poles does not dier. Also 24 VDC models can operate with 24
VAC voltage.
12 11
10 9 8
7
3
2 1
LS30 / MLG30
SENSOR INPUT
RS 485
DATA+ DATA-
- +
4-20 mA / 0-10 V
OUTPUT
LINP2 LINP1
L N
21
20 19 15
14
1318
17
16
SUPPLY
220 VAC / 50Hz.
PE
RELAY OUTPUT
(R1)
RELAY OUTPUT
(R2)
RELAY OUTPUT
(R3)
+- in