KBC KBC-20VS User Manual

MACHINERY DlVlSION
6465 18 MlLE ROAD
STERLlNG HEIGHTS, MI 4831 4
PHONE:
(586) 731 -3600 * 1 -8W-860-1740
FAX:
(586) 731 -7464 . 1 -800-862-1 740
MODEL 20" VS
DRILL PRESS
THANK YOU FOR PURCHASING WlTH KBC MACHINERY. ALL KBC
MACHINES ARE BACKED BY OUR
1 YEAR PARTS REPLACEMENT
WARRANTY. WHEN USED AS INTENDED, AND WlTH PROPER
MAINTENANCE
THIS MACHINE WILL PROVIDE YOU WlTH YEARS OF
TROUBLE-FREE SERVICE. IF YOU NEED PARTS SIMPLY
FILL OUT
THE PARTS REQUEST FORM, AND FAX OR E-MAIL YOUR REQUEST.
ALL OTHER QUESTIONS PLEASE CONTACT US
@ :
KBC MACHINERY
6465 18 MILE ROAD
STERLING
HEIGHTS,MI 48314
PH (800) 860-1740
FAX (800) 662-1740
MACHINERY@KBCTOOLS.COM
-
WWW.KBCTOOLSANDMACHlNERY.COM
www. KBCTOOLS . COM

KBC KBC-20VS Specifications

General

Brand	KBC
Model	KBC-20VS
Category	Power Tool
Language	English

Summary

KBC Machinery Introduction

Parts Request Form

Model Identification

Drill Press Illustration

General Safety Warnings

Machine Specifications

Setup and Initial Operation

Cleaning Procedures

Instructions for cleaning the drill press after uncrating and for preventing rust.

Installation Guidelines

Recommendations for bolting the machine to the floor for accurate and vibration-free operation.

Raising the Head Assembly

Step-by-step guide on how to raise the drill press head to the operational level.

Operational Adjustments and Controls

Adjusting Table Position (Raising Rack)

Procedure to move the table closer to the spindle by adjusting the rack.

Control Panel Overview

Explanation of the switches, buttons, and indicators on the drill press control panel.

Advanced Operations and Lubrication

Changing Spindle Speeds

Procedure for adjusting spindle speeds using the handwheel control.

Depth Stop Adjustments

Instructions for setting the depth stop for drilling and tapping operations.

Spindle Return Spring Adjustment

How to increase or decrease tension on the spindle return spring.

Lubrication Recommendations

Guidelines for applying grease and oil to various machine parts.

Detailed Lubrication Procedures

Head Assembly Diagram

Head Assembly Parts List

Variable Speed Assembly Diagram

Variable Speed Assembly Parts List

Column, Table, and Base Assembly Diagram

Column, Table, and Base Assembly Parts List

Depth Stop and Control Box Assembly Diagram

Depth Stop and Control Box Parts List

Electrical Panel Components

Electrical Panel Wiring Diagrams

Gear Box Assembly Diagram

Gear Box Assembly Parts List