22
Operating Instructions KBL 7900/KBL 7000/KBL Convertible
Illustr. 5-12 Shoulder tanner with
loudspeaker (open)
Illustr. 5-13 Series apparatuses and
starter for shoulder tanner (open)
Illustr. 5-14 Shoulder tanner (closed)
Replacement
intervals
Tubes, facial tanners and starters have to be replaced only by
those of the same type!
When installing the tubes, make sure that the inscription is
visible, i.e. the refl ector must be at the back.
For units equipped with CPI technology, it is essential to carry
out a reset after each tube replacement! (see Section 8.3)
For units equipped with inductive technology (shoulder tanner)
also install new starters when replacing the tubes!
Burner Tubes CPI Mode
Shoulder tanner Öko Power
750 hrs. 500 – 600 hrs. 800 hrs 500 hrs.
Exchange
Tubes and Starters
Perform CPI Reset
To Next Page
Loading...
