EasyManua.ls Logo

KBL 7900 - Tubes and Facial Tanners

KBL 7900
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
1
1
1
2
21
Operating Instructions KBL 7900/KBL 7000/KBL Convertible
Illustr. 5-10 Dismantling the
tube cover
Illustr. 5-11 Dismantling the
lter pane frame
Cleaning For a harmless cleaning of the fi lter panes use the special
cleaning and disinfectant fl uid „ megaClean “ which has to
be diluted in water in a ratio of 1:13. Or use a normal glass
cleaning agent with a soft cloth or a chamois leather.
5.4 Tubes and facial tanners
Dismantling In order to clean or replace the tubes and facial tanners, please
proceed as follows:
Cleaning intervals To make sure that the tanning effect is maintained, we
recommend you to clean the tubes and UV radiators with warm
water and a chamois after approx. every 200 hours of use. Do
not use any aggressive or alcoholic cleaning agents.
Tubes in the
shoulder tanner
The shoulder tanner „activeFlex“ is equipped with 7 tubes of
25 W each. In addition, the loudspeakers are located in this
element.
Step Procedure Reference
1 Completely dismantle the acrylic panes. Section 3.2
2 Remove the tube covers in the facial area. Section 3.3.
3 In apparatuses equipped with burners you will have to
dismantle the fi lter panes as well
Section 3.3.
4 Tilt up the base pane. Section 3.2

Related product manuals