V7.00
24449_EDEKZA0031-2619-1_DE-EN
4
Before connecting the device to the power supply, check whether the local power supply
conditions comply with the specications on the device nameplate.
CAUTION
A faulty connection can lead to the destruction of the device!
For device connection, the data given in the connection chart must be complied with
(see „Connection chart“) and there must be no voltage in the connection lines. When
wiring, always ensure that all wiring material used is neither damaged nor defective and
that the polarity is correct!
In order to ensure proper and safe product operation, it must be transported, stored, ins-
talled and assembled in accordance with the specications, as well as carefully operated
and maintained.
A visibly damaged device must generally be considered unt for use and disconnected
from the power supply!
Error detection, repair and maintenance work may only be carried out in our facilities or
after contacting our service team. Opening the device unauthorized shall render your
warranty null and void. Correct operation can no longer be guaranteed!
Opening the device may expose live parts. Capacitors in the device may still be under
load, even if the device has been disconnected from all voltage sources. Open devices
must not be operated!
Systems that are at risk from lightning strikes must feature lightning protection for all
input and output lines!
1.4 Product liability
You have purchased a high-quality product. Only components of the highest quality and
maximum reliability are used.
Each device is subject to long-term testing before it is delivered.
For details on product liability, please refer to our general terms and conditions for elect-
ronic equipment, which you can nd at www.kbr.de.
Warranty device properties apply only if the device has been operated in accordance
with its intended use!
To Next Page
Loading...
Need help?
General
