Need help?Do you have a question about the KBR multicomp F144-MS-1V1C1TI6DO6RO-3 and is the answer not in the manual?
General| Input Voltage | 24 V DC |
|---|---|
| Digital Inputs | 6 |
| Digital Outputs | 6 |
| Analog Inputs | 1 |
| Analog Outputs | 1 |
| Protection Class | IP20 |
| Communication Interface | RS-485 |
| Operating Temperature | -20°C to 60°C |
Overview of the 4-quadrant controller for network analysis.
Standard configuration values for the controller after a reset.
Guidance on connecting current transformers and measuring voltage.
Key settings and steps for initial system startup and configuration.
Step-by-step setup process and parameter configuration.
Troubleshooting steps for insufficient stage activation or system dimensioning.
Diagnosing and resolving issues with too many stages or frequent switching.
Information on connection elements, fuse protection, and wiring.
List of Modbus commands the device responds to.
Configuration settings for Modbus communication like baud rate and parity.
Mapping of Modbus addresses to device parameters and their values.
Comprehensive list of data points with addresses, units, and formats.
To Next Page
