KBR multicomp D6 7 Series - User Manual

24905_EDEBDA0272-5019-1_EN
User Manual
Technical Parameters
multicomp D6-xxx-7
System
I
English

KBR multicomp D6 7 Series Specifications

General

Brand	KBR
Model	multicomp D6 7 Series
Category	Controller
Language	English

Summary

Introduction

1.3 Safety Notes

Provides important safety instructions for installation, operation, and maintenance.

1.6 Overvoltage and Lightning Protection

Recommendations for protecting devices from damage due to overvoltage.

Connecting the multicomp D6-xxx-7

2.1 Installation and Assembly

Guidelines for observing regulations, power supply conditions, and connection charts during installation.

2.2 Connection Diagram

Illustrates the wiring and terminal connections for the multicomp D6-xxx-7 device.

2.3 Terminal Assignment

Details the function and connection of each terminal on the device.

Commissioning Guideline for multicomp D6-xxx-7

3.1 Controller Not Configured

Step-by-step procedure for starting up an unconfigured controller.

3.2 Default Settings After Reset

Functions of the Controller in the secureC Safety and Maintenance Concept

4.1 Stage Resonance Frequency Monitoring

Monitors stage resonance frequency to detect loss of capacitance and prevent stage locking.

4.2 Current Consumption Monitoring of Stages

4.3 Temperature Monitoring of Stages

Control and Display Panel

5.3 Device Configuration and Commissioning

Basic Device Configuration

6.1 Setting Transformer Ratio

Guides on configuring primary and secondary current transformer ratios.

6.2 Set Target Cosφ

Instructions for setting the desired target power factor (cosφ).