KBR multicomp D6 7 Series - Current Measurement Module LED Display; Function of Scan Button

V7.00
24905_EDEBDA0272-5019-1_EN
132
8.5.3 Function of Scan button
NOTE
If the scan button is pressed briey, the module
enters scanning mode.
8.5.2 Current measurement module LED display
In KBR-eBus scanning mode, the power LED ashes quickly; in the module detection
mode it ashes slowly.
In normal operation, the LED is illuminated constantly.
Power LED: Operating voltage
multisio D2 4CI - Appendix