KBR multicomp D6 7 Series - Technical Data

V7.00
24905_EDEBDA0272-5019-1_EN
142
9.5 Technical data:
Power supply: Via module bus 24VDC / ca. 1.3W
Connection RJ-12:6P6C modular connector
Hardware inputs:
4 analog inputs: Measuring range 0/4 - 20 mA, 0/2 - 10 V
Plug-in terminal, 8-pin
Module bus interface: Serial interface RS-485
Module bus connection RJ-12 for ready-made KBR system
cable, max. length 30m
when suitably placed
Transmission
speed
38400 Bps
Bus protocol KBR module bus
Display: LED 4x message
1x operation display
Control unit: DIP switch 1x fourfold,
input conguration
Button Scan button (module bus)
Mechanical data:
DIN rail device: Housing dimensions 90 x 36 x 61 mm (H x W x D)
Mounting type Wall mounting on DIN rail 7.5 mm
deep, in accordance with DIN EN
50022. Suitable for distribution
board mounting
Weight Approx. 100g
Standards and
Miscellaneous:
Standards DIN EN 60721-3-3/A2: 1997-07;
3K5+3Z11; (IEC721-3-3; 3K5+3Z11)
Operating temperature -5°C ... +55°C
Air humidity 5% ... 95%, non-condensing
Storage temperature -25°C ... +70°C
Appendix – multisio D2-4AI analog input module