KBR multicomp D6 7 Series - DIP Switch Functions

V7.00
24905_EDEBDA0272-5019-1_EN
130
8.4.4 DIP switch functions
The DIP switches do not function when in
operation on the multicomp D6-xxx-7
Module-specic technical data:
Hardware inputs:
Temperature inputs Measuring range -20°C to +100°C +/- 2°C
2-pole plug terminal for PT-1000 sensor
Hardware outputs:
2 relay outputs 4-pole plug terminal oating
Contact capacity 500VA each, 2A, 250V and
50/60Hz
Overvoltage category CAT II
Display LED 4x message, 1x operation
display
Control unit DIP switch 1x eightfold
Button Scan button (module bus)
multisio D2 4RO accordance with ISO - Appendix