KBR multicomp D6 7 Series - 6.2 Set Target Cosφ

V7.00
24905_EDEBDA0272-5019-1_EN
112
6.2 Set target cosφ
After pressing the
N
(Cos.) button, the following is displayed in the hot key area:
After pressing the

(EDIT) button, the following is displayed in the hot key area:
If the setting was changed, the following display appears after the third line in the hot
key area of the display if the  key (scrolling function) is pressed
Return
Scroll through lines in the value range
P  N 
   
+/- Value input
Continue to next digit
Display hot-key area
Leave setting menu without saving
Scroll through lines in the value range
P  N 
NO  YES
Leave settings menu and save
Display hot-key area
Return
Target cosine
P  N 
 EDIT
Processing target cosine consumption,
recovery and alarm cosine (FTS)
Menu description
Display hot-key area
Device conguration