KBR multicomp D6 7 Series - Basic Device Configuration; 6.1 Setting Transformer Ratio

V7.00
24905_EDEBDA0272-5019-1_EN
109
6 Basic device conguration
The menu guidance of the multicomp D6-xxx-7 is self-explanatory.
The operator is guided and supported by the device through operating instructions
displayed for the respective situation.
As an example of the basic conguration procedure, the functions in the Commissioning
menu will be looked at more closely in the following.
Menu item: Transformer
Return
Display and processing of main current transformer
Transformer
P  N 
 »À I »À Ie »À U
Display and processing
of voltage transformer
Display and processing
of induced current transformer cabinets 1 to 6
Menu description
Display hot-key area
Return
P  N 
 EDIT
Congured transformer ratio
current transformer
Display hot-key area
6.1 Setting transformer ratio
After pressing the

(»À) button, the following is displayed in the hot key area
After pressing the

(»À I) button, the following is displayed in the hot key area
Device conguration