KBR multicomp D6 7 Series - Function of Scan Button; Function of DIP Switch

V7.00
24905_EDEBDA0272-5019-1_EN
141
9.3 Function of Scan button
NOTE
If the scan button is pressed briey, the module enters the scan mode.
Illustrated switch setting:
OFF = white
ON = gray
Illustrated switch setting:
OFF = white
ON = gray
9.4 Function of DIP switch
Switch set to o: Switch set to on:
S1 = 0 / 2-10 V S1 = 0 / 4-20 mA
S2 = 0 / 2-10 V S2 = 0 / 4-20 mA
S3 = 0 / 2-10 V S3 = 0 / 4-20 mA
S4 = 0 / 2-10 V S4 = 0 / 4-20 mA
Appendix – multisio D2-4AI analog input module