KBR multicomp D6 7 Series - Messages; 5.13.9.1 Submenu Messages

V7.00
24905_EDEBDA0272-5019-1_EN
105
Return
Current error message
Messages
P  N 

Message
Stat. Rel.
Allocation of alarm relays and stage
switch-o
Error state
Menu description
Display hot-key area
Under the item Firmware version, the rmware states of the controller and the separat-
ed LC display can be shown. Here the term BS stands for Basic, 7.00 for the rmware
version and r001 for the release of the rmware version of the basic module, 7.00
stands for the rmware version and r001 for the current release of the rmware version
of the display module.
The rmware version of any connected additional modules can be displayed under Extras
, Settings , Modules/display , Module management via the module conguration.
5.13.9 Messages
5.13.9.1 Submenu Messages
The Messages submenu contains the following items:
1. Current error messages
2. Error state messages
3. Relay/stage switch-o
Under the item current error messages, error messages are displayed that are tempo-
rary and do not have to be acknowledged, since they are shown for only as long as the
error occurs. An exception to this is the message FTS (“facility too small”), which is both
displayed as an error message and a status message.
System operation