V7.00
24905_EDEBDA0272-5019-1_EN
148
10.5 Technical data:
Power supply: Via module bus 24 V DC/approx. 2 W
Connection RJ-12:6P6C modular connector
Hardware inputs:
4 digital inputs S
0
compatible < 2 mA = o, > 10 mA = on
Output voltage < 24 VDC, ensure correct polarity
Output current <= 15 mA
Plug-in terminal, 8-pin
Module bus interface: Serial interface RS-485
Module bus connection RJ-12 for ready-made
KBR system cable, max. length
30m when suitably placed
Transmission
speed
38400 Bps
Bus protocol KBR module bus
Display: LED 4x message
1x operation display
Control unit DIP switch 1x eightfold,
input conguration
Button Scan button (module bus)
Mechanical data:
DIN rail measuring
device
Housing dimensions 90 x 36 x 61 mm (H x W x D)
Mounting type Wall mounting on DIN rail 7.5 mm
deep, in accordance with DIN EN
50022. Suitable for distribution
board mounting
Weight Approx. 70 g
Appendix – multisio D2-4DI digital input module
To Next Page
Loading...
