KBR multicomp D6 7 Series - Page 111

V7.00
24905_EDEBDA0272-5019-1_EN
111
After pressing the
N
(»À Ie) button, the following is displayed in the hot key area:
After pressing the

(EDIT) button, the following is displayed in the hot key area:
If the setting was changed, the following display appears after the second line in the hot-
key area of the display when the  key (scrolling function) is pressed:
Return
Select induced current measurement
single-phase or 3-phase
P  N 
 Para  EDIT
Congure induced current transformer
cabinet 1
Continue with cabinets 2 to 6
Display hot-key area
Return
Scroll through lines in the value range
P  N 
   EDIT
Enter value
Continue to next digit
Display hot-key area
Return
Select induced current measurement
single-phase or 3-phase
P  N 
 Para  EDIT
Start conguration
Continue with cabinets 2 to 6
Display hot-key area
Device conguration