Rev. 1.00
22586_EDEBDA0253-0318-1_EN
26
KBR multicomp F144-3 6DO/6RO Description of the display window
multicomp 12 Hy
Initialization
Commissioning
next
8 Description of the individual
display windows
8.1 Initialization window:
This is displayed after connecting the power supply to the controller.
NOTE
Please do not press any sensor buttons during initialization, as they are adjust-
ed automatically to ensure correct operation.
8.2
Commissioning window if no stage power is programmed
During initial startup of the multicomp F144-3, the Commissioning menu is dis-
played as the F144-3 start screen (after the initialization phase) once you have
connected the power supply.
This menu is used for initial startup of the controller, where all necessary set-
tings can be made.
If you wish to use a controller that is already integrated into a KBR compensa-
tion system by default, only the parameters of the current transformer need to
be con gured.
Press
W to select submenus.
To Next Page
Loading...
