KCodes 6 Series - Requesting Device Access

To Next Page

To Previous Page

4.9. Request to Connect

If a USB device is manually connected by any other user, basically you can not connect that device.

However, we offer another mechanism called “Request to Connect” to solve this inconvenience. For

example, there are two computers – TESTES and TEST. Now the owner of “HP Photosmart 2600” is TEST.

Then, the TESTES computer wants to use this HP printer. The user on the TESTES computer can click the

“Request to Connect” button in the Control Center. The following window appears.

At this moment, the user on the TEST computer will see the following window, indicating that another

computer – TESTES is requesting to use the HP printer.

The user will choose to accept or reject. If accepted, the Control Center on TEST will automatically

disconnect the device and the Control Center on TESTES will automatically connect that device.