© 2019 KCodes Corporation. All rights reserved. 6 Series User’s Manual V1.0
Administrator: You can change administrator name and password. If you forgot administrator
name and password, you must perform Restore Factory Default action by plugging in the power
adaptor while pressing the Init button. Please refer to the chapter “Restore Factory Defaults”.
Administrator: enter your desired administrator name.
New Password: enter your desired password.
Re-type Password: re-confirm the password.
Maintenance If you want to restore factory default values of the Server or upgrade new
firmware, you can use the Maintenance tool.
Restart: click this button to restart (reboot) the Server.
Factory Default: click this button, the Server will restore factory default values.
Firmware Upgrade: click Browse to find the firmware file to be upgraded. Click
Upload to upload the firmware into the Server.
To Next Page
Loading...