Need help?Do you have a question about the Keba Kemro CP 263/S and is the answer not in the manual?
General| Protection Class | IP65 (front), IP20 (rear) |
|---|---|
| Power Supply | 24 VDC |
| Ethernet | 10/100 Mbps |
| USB | USB 2.0 |
| Serial Interface | RS232, RS485 |
| Display | TFT |
Describes the structure, installation, and configuration of the CP 263/x CPU module.
Details required knowledge and skills for target groups like Project Engineer and Electrician.
Specifies application areas and usage compliance for industrial machines.
Defines the manual as an integral part of the product.
Lists related documents for different system solutions and target groups.
Provides information about EtherCAT trademark and licensing.
Explains symbols used for DANGER, WARNING, CAUTION, and Information.
Provides essential safety guidelines, excluded applications, and installation requirements.
Warns about electric shock hazards and proper voltage supply.
Details precautions for qualified personnel performing maintenance activities.
Illustrates and labels the front panel components of the CP 263/x.
Explains the function and usage of the Compact Flash slot for firmware and data.
Lists recommended Compact Flash cards and connector strip details.
Explains the 7-segment display for start-up modes and error codes.
Describes the multi-colored status LED and its meanings.
Details the function of the control key for operating state changes.
Explains the RX and TX LEDs for the CAN interface.
Describes Link-Status and Activity LEDs for the Ethernet connection.
Refers to the system manual for mounting instructions.
Details the assignment of slots and procedures for option modules.
Provides information on output power for add-on modules and calculation guidelines.
Discusses ventilation requirements, heat dissipation, and operating temperature limits.
Details the 24 V power supply, grounding, and wiring precautions.
Explains grounding requirements and methods for the module.
Describes the graphic interface for connecting an operating panel.
Introduces the CAN interface and its features.
Details the position and types of Ethernet interfaces available.
Describes the availability and caution for USB ports.
Emphasizes careful wiring and shielding for EMC compliance.
Explains how to set the K-Net address using address switches.
Describes system behavior during complete power supply failure.
Explains how module errors are displayed on the diagnosis display.
Details the function of CPU and K-Bus watchdogs.
Covers battery type, service life, and replacement precautions.
Details fan service life and replacement procedures.
Provides CAUTION regarding disposal of electric and electronic devices.
Warns about hazardous waste regulations for battery disposal.
Lists general technical specifications like voltage, current, power, and protection class.
Specifies operating and storage temperatures, humidity, and resistance.
Details processor, memory, and battery-buffered SRAM specifications.
Lists specifications for CAN, Ethernet, and USB interfaces.
Provides module dimensions (height, width, depth) and weight.
Lists EC directives for electromagnetic compatibility and RoHS.
Lists applied European standards for system conformity.
To Next Page
