Keba Kemro CP 263/S - 10.2 Fan

10.2 Fan
10.2.1 Service life
Service life: minimum of 3 years, typically 5 years.
10.2.2 Replacing fan
CAUTION
● Operation without fan is not permitted since this could overheat the module
and destroy it.
The fan located in the fan case on the bottom of the housing may only be
replaced with a fan of the same type.
Fig.10-2: Fan case. Position on the bottom of the housing
1
... Back side of the fan case
2 ... Fastening screw with pressure spring
The fan case with fan must be obtained from KEBA.
CP 263/S, CP 263/X Maintenance
© KEBA 2014
Project engineering manual V1.01 35