CAUTION!
Fire hazard during module failure!
● Provide suitable fuses for the 24 V DC power supply of the control system
for the final application! (for details, refer to the Power supply section).
2.4 Safety instructions for device maintenance
CAUTION!
● The device may only be opened by qualified personnel and only mainte-
nance activities expressly approved by KEBA may be performed (see chap-
ter “maintenance”). Any other manipulations to the device will result in loss
of warranty.
● If this device is damaged, the device must be taken out of commission and
repaired or replaced by qualified personnel.
Safety notes CP 263/S, CP 263/X
© KEBA 2014
Project engineering manual V1.0114
To Next Page
Loading...
