Keba Kemro CP 263/X User Manual

● Configuration
● Operating behavior
● Diagnostics functions
● Maintenance instructions
● Technical data
1.4.2 Not contained in this document
● Programming instruction
● Application diagnosis
● Firmware description
1.5 Documentation for further reading
The following documents are to be observed depending on the system solution
used:
For version CP 263/S:
Doc.No. Name Target group
DE: 65352
EN: 65353
K2-200 automation system manual
● Project engineer
● Electrician
● Programmer
● Commissioning foreman
● Service technician
For version CP 263/X:
Doc.No. Name Target group
DE: 1000868
EN: 1000869
KeMotion automation system manual
● Project engineer
● Electrician
● Programmer
● Commissioning foreman
● Service technician
1.6 EtherCAT declaration
EtherCAT® is registered trademark and patented technology, li-
censed by Beckhoff Automation GmbH, Germany .
CP 263/S, CP 263/X Introduction
© KEBA 2014
Project engineering manual V1.01 11

Keba Kemro CP 263/X Specifications

General

Brand	Keba
Model	Kemro CP 263/X
Category	Control Unit
Language	English