6.1.1 Connection example
Fig.6-1: Power supply
Fuse F1
The rated current for fuse F1 is dependent on the power consumption of the
added-on modules.
6.2 Grounding
If required for reasons of electrical safety for the end usage, the metal parts of
the module have to be grounded via the threaded bushing (M4) that is located
on the bottom side of the enclosure (grounding point with ground icon).
Material: Electrolytic galvanized sheet steel, blue galvanized self-clinching
standoff.
CP 263/S, CP 263/X Connections and wiring
© KEBA 2014
Project engineering manual V1.01 25
To Next Page
Loading...
