Keba Kemro CP 263/X - Cable and Plug Specification; USB Ports (USB0, USB1); EMC and Wiring Guidelines

6.5.2 Cable and plug specification
Further information: See system manual.
6.6 USB ports (USB0, USB1)
2 ports are available to connect external USB-devices.
Fig.6-10: Position of the USB ports
Further information: See system manual.
CAUTION
● The use of common USB devices may result in unexpected system behavior
or system failures, as these devices are not normally designed for operation
in an environment with industrial interference.
● Never keep USB-devices constantly connected, as the USB-ports are not
operationally reliable (danger of unplugging).
6.6.1 Cable and plug specification
Further information: See system manual.
6.7 EMC and wiring guidelines
Pay attention from the outset to careful wiring and shielding.
Further information: See system manual.
Connections and wiring
CP 263/S, CP 263/X
© KEBA 2014
Project engineering manual V1.0130