IEEE-488.2 common commands and queries
9-2
IEEE-754 double precision data format 11-6
IEEE-754 single precision data format 11-5
IFC (interface clear) 7-6
Independent voltage measurements (DVM)
2-18
Inspection 1-3
Instrument re-assembly 15-6
Integration time 1-16, 4-7
Interface clear 7-6
internal impedance E-2
Internal source relay control 5-3
Introduction
Calibration 14-2
Disassembly 15-2
GPIB Operation 7-2
Replaceable parts 16-2
Verification 13-2
L
LI, NiMH, and NiCd handset battery packs E-3
Line power
Calibration 14-2
Verification
13-3
LLO (local lockout) 7-7
Local 2-4
LOCAL key 7-8
Local lockout 7-7
Local sense connections 2-4
LONG INTEGRAT 1-16
Long integration 1-10, 4-2
display mode 4-10
measurement procedure 4-10
Measurements 4-1
Integration time 4-3
Programming example 4-19
Trigger edge 4-3
readings
7-5
search, and reading time
comparison 4-5
Long-form and short-form versions 7-11
LOW TIME 1-15
M
Main MENU structure 1-15
MAV (Message Available Bit) 7-5
Measurement configuration 2-15, 2-19, 4-7
Measurement event status 8-14, 8-15
Mechanical parts list 16-15
Menu 1-14
Message G-3, G-4
Message Available Bit 7-5
Message exchange protocol 7-14
Model 2306 Dual Channel Battery/Charger
Simul
ator 1-4, 1-5, F-3
Multiple command messages 7-12
Multiple response messages 7-14
N
NPLC RATE 1-15
NPLC rate 2-16
O
operate 2-9
Operation event status 8-12, 8-13
Optional Command Words 1-18
Options and accessories 1-3
Ordering information 16-2
Output 2-10
output 2-7
Output bandwidth 1-15
OUTPut command summary 12-5
Output impedance 1-15, 2-11
changing 2-11
Output queue
8-20
OUTPUT RELAYS 1-15
Outputting and reading back V and I 2-21
Outputting voltage and current 2-5
Overview
Common commands 9-2
Long Integration Measurements 4-2
Pulse Current Measurements 3-2
Relay control 5-2, 6-2
Signal oriented measur
ement commands
10-2
Status structure 8-2
P
Parameters 7-9
Parts lists and component layouts 16-2
PC boards handling 15-2
PCURrent FAST, SEARch, and DETect
co
mmand reference 3-20
Phone numbers 1-2
Power 1-8
POWER ON SETUP 1-15
Power supply overview 1-4, F-2
Power Up
Connection
Line Power 1-8
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com