Keithley 2611B User Manual

To connect line power:
1. Make sure the front panel power switch is in the off (0)
position.
2. Connect the socket of the supplied power cord to the power
connection on the rear panel.
3. Connect the plug of the power cord to a grounded AC outlet.
Operating the instrument on an incorrect line
voltage may cause damage to the instrument,
possibly voiding the warranty.
Turn on the instrument
Turn on the instrument by pressing the front panel POWER
switch to the on (|) position.

Keithley 2611B Specifications

General

Brand	Keithley
Model	2611B
Category	Measuring Instruments
Language	English