Safety
Introduction
Power-up sequence
When the instrument is turned on, you should see:
• A series of dots.
• All segments of the display light.
• A brief display showing the instrument model. For
example, if the instrument is a 2612B, the display will
show “KEITHLEY Model 2612B.”
• Line frequency detection and other startup checks.
The entire power-up process takes approximately 30 seconds to
complete. When initialization is complete, if the instrument is a
2612B or 2614B, you will see the default display screen, shown
below.
If the instrument is a 2611B, you will see the default display
screen, shown below.
TestUnpack
Safety
FAQs
Next Steps
Introduction
Connect
To Next Page
Loading...
