To Next Page

To Previous Page

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference

3700AS-901-01 Rev. D/June 2018 11-199

dmm.measure(MathBuffer)

printbuffer(1, 5, MathBuffer)

printbuffer(6, MathBuffer.n, MathBuffer)

dmm.measurecount = 1

for x = 1, 3 do

print(dmm.measure())

end

Store the 5 additional readings in MathBuffer with

math operations enabled.

View the readings with and without math operation.

Take 3 additional math readings without using the

buffer.

Sample output assuming no load was connected to

DMM:

Readings with no math operation:

3.898423119e-07, 4.066727213e-07,

5.122452892e-07,

4.724643216e-07,

4.770544332e-07

Readings with math operation:

5.061251403e-01, 4.158529446e-01,

5.504962196e-01,

3.821921259e-01,

6.132277455e-01

5.367258847e-01

6.040475222e-01

6.132277455e-01

Also see

Math calculations (on page 4-49)

dmm.configure.recall() (on page 11-165)

dmm.configure.set() (on page 11-166)

dmm.math.format (on page 11-200)

Keithley 3700 Series User Manual

Other manuals for Keithley 3700 Series