Need help?Do you have a question about the Keithley 2010 and is the answer not in the manual?
General| Frequency Range | 3 Hz to 300 kHz |
|---|---|
| DC Voltage Range | 100 mV to 1000 V |
| AC Voltage Range | 100 mV to 750 V |
| DC Current Range | 3 A |
| DC Current Accuracy | 0.05% |
| AC Current Range | 3 A |
| Resistance Accuracy | 0.01% |
| Interface | GPIB, RS-232 |
| Power Supply | 50 Hz or 60 Hz |
Details critical electrical safety practices and hazard awareness.
Troubleshooting steps for communication link errors.
Procedure for checking DC voltage measurement accuracy.
Procedure for checking AC voltage measurement accuracy.
Procedure for checking DC current measurement accuracy.
Procedure for checking AC current measurement accuracy.
Procedure for checking resistance measurement accuracy.
Procedure for checking temperature measurement accuracy.
Procedures for verifying frequency and ratio functions.
Procedure for front panel short and open circuit calibration.
Steps for calibrating the DC voltage function.
Steps for calibrating the resistance function.
Steps for calibrating the DC current function.
Steps for calibrating the AC voltage function.
Steps for AC current calibration and setting dates.
Detailed steps for remote DC calibration.
Detailed steps for remote AC calibration.
Details DC characteristics, noise, and operating speeds.
Details AC characteristics, system speeds, and errors.
Explains how to calculate DC and AC measurement accuracy.
Reference for commands related to DC calibration steps.
Reference for commands related to AC calibration steps.
To Next Page
