Need help?Do you have a question about the Keithley 2700 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Measurement Functions | DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature |
| DC Voltage Range | 100 mV to 1000 V |
| AC Voltage Range | 100 mV to 750 V |
| Frequency Range | 3 Hz to 500 kHz |
| Temperature Range | -200°C to +1372°C |
| Display | Vacuum Fluorescent Display |
| Connectivity | IEEE-488, RS-232 |
| Channels | 10 |
| Power Supply | 100V to 240V AC, 45Hz to 66Hz |
| DC Current Range | 10 µA to 3 A |
| AC Current Range | 10 µA to 3 A |
| Temperature Measurement | Thermocouple, RTD |
Defines user roles and emphasizes general precautions against electric shock.
Details the steps for conducting verification tests for Model 2700 and Model 7700.
Describes the procedure for verifying DC voltage accuracy on the Model 2700.
Details the process for verifying AC voltage accuracy on the Model 2700.
Explains how to verify DC current accuracy for the Model 2700.
Outlines the procedure for verifying AC current accuracy on the Model 2700.
Describes the steps to verify resistance accuracy for the Model 2700.
Details the procedure for verifying temperature measurement accuracy on the Model 2700.
Explains how to verify frequency measurement accuracy for the Model 2700.
Describes the procedure for verifying DC voltage accuracy on the Model 7700.
Details the process for verifying AC voltage accuracy on the Model 7700.
Explains how to verify DC current accuracy for the Model 7700.
Outlines the procedure for verifying AC current accuracy on the Model 7700.
Describes the steps to verify resistance accuracy for the Model 7700.
Details the procedure for verifying temperature measurement accuracy on the Model 7700.
Specific procedure for verifying RTD temperature accuracy on Model 7700.
Explains how to verify frequency measurement accuracy for the Model 7700.
Describes the procedure for verifying ratio and average measurements on the Model 7700.
Explains how to set and manage calibration codes for front panel and remote calibration.
Details the procedure for full calibration of DCV, DCI, ACV, ACI, and ohms functions.
Outlines the steps for performing calibration via the front panel.
Details the procedure for calibrating the DC voltage function.
Explains the steps for calibrating the resistance function.
Details the procedure for calibrating the DC current function.
Explains how to calibrate the AC voltage function.
Details the procedure for calibrating the AC current function.
Outlines the procedure for performing calibration remotely via IEEE-488 or RS-232.
Describes the procedure for performing manufacturing calibration using the front panel.
Details the procedure for performing manufacturing calibration remotely.
Describes the procedure for front panel calibration of the Model 7700.
Details the procedure for remote calibration of the Model 7700.
Guides on setting line voltage and replacing the main power line fuse.
Step-by-step guide to replace the front panel AMPS fuse.
Instructions for replacing fuses in the Model 7700 plug-in module.
Instructions for replacing fuses in the Model 7702 plug-in module.
Discusses important considerations and cautions before performing instrument repairs.
Explains precautions for handling static-sensitive CMOS devices to prevent damage.
Step-by-step instructions for removing the instrument's case cover.
Details the procedure for removing the motherboard from the chassis.
Instructions for removing the card cage that holds plug-in modules.
Procedures for removing the display board and pushbutton switch pad.
General section for removing power transformer and power module.
Steps to remove the power transformer.
Steps to remove the power module.
Guidelines for reassembling the instrument, ensuring proper seating and connections.
A detailed list of replaceable components for the Model 2700 motherboard.
A list of replaceable parts for the Model 2700 connector board.
A list of miscellaneous replaceable parts for the Model 2700.
A list of replaceable parts for the Model 7700.
A list of replaceable parts for the Model 7702.
A list of replaceable parts for the Model 7703.
Details the DC measurement characteristics, including accuracy and conditions.
Provides detailed specifications for DC voltage, resistance, and current measurements.
Details the AC measurement characteristics, including accuracy and conditions.
Explains how to calculate DC accuracy using ppm values and provides an example.
Explains how to calculate AC accuracy using percentage values and provides an example.
Explains how to calculate dBm accuracy from voltage and reference impedance.
Explains how to calculate dB accuracy from voltage readings and a defined VREF.
Summarizes Model 2700 calibration commands and their descriptions.
To Next Page
