6-2 Replaceable Parts
Introduction
This section contains replacement parts information and component layout drawings for the
Model 2700, Model 7700, Model 7702, Model 7703, and Model 7705.
NOTE For additional information about the Keithley modules, refer to the appropriate
appendix in the Model 2700 User’s Manual.
Parts lists
Both electrical and mechanical parts for the Model 2700 are listed in several tables on the
following pages. For additional information on mechanical parts, see the assembly drawings
provided at the end of Section 5.
Ordering information
To place an order, or to obtain information concerning replacement parts, contact your
Keithley representative or the factory (see inside front cover for addresses). When ordering
parts, be sure to include the following information:
• Instrument model number (Model 2700)
• Instrument serial number
• Part description
• Component designation (if applicable)
• Keithley part number
Factory service
If the instrument is to be returned to Keithley Instruments for repair, perform the following:
• Call the Repair Department at 1-888-KEITHLEY for a Return Material Authorization
(RMA) number.
• Complete the service form at the back of this manual, and include it with the
instrument.
• Carefully pack the instrument in the original packing carton.
• Write ATTENTION REPAIR DEPARTMENT and the RMA number on the shipping
label.
Component layouts
Component layouts for the various circuit boards are provided on the following pages.
To Next Page
Loading...
Need help?
General
