Need help?Do you have a question about the Keithley DAQ6510 and is the answer not in the manual?
General| Measurement Functions | DC Voltage, AC Voltage, DC Current, AC Current, Frequency, Temperature, Capacitance |
|---|---|
| Frequency Range | 3 Hz to 300 kHz |
| Temperature Range | -200°C to 1820°C |
| Connectivity | USB, Ethernet, GPIB |
| Digit Display | 6.5 digits |
| Channels | Up to 80 channels |
| Memory | Internal non-volatile memory for data storage |
| Power Supply | 100 V to 240 V, 50 Hz to 60 Hz |
| Dimensions | 213 mm x 297 mm x 88 mm (8.4 in x 11.7 in x 3.5 in) |
| Weight | 3.6 kg |
Explains how to use the touchscreen for navigation and input.
Overview of available interfaces for controlling the DAQ6510 remotely.
Guide to configuring and establishing Local Area Network connections.
Instructions for connecting and communicating with the DAQ6510 via USB.
Details on installing and using the GPIB interface for instrument control.
Information on configuring and using the TSP-Link for instrument networking.
How to access and utilize the instrument's web-based control interface.
Guide to selecting and changing the instrument's command language.
Step-by-step guide for making common measurements directly on the instrument.
How to set up and perform a thermocouple temperature scan.
SCPI command sequence for automating temperature measurements.
Steps to configure and execute DC voltage measurements across channels.
To Next Page
