To Next PageTo Next Page
Need help?Do you have a question about the Keithley 2015 and is the answer not in the manual?
General| Model | Keithley 2015 |
|---|---|
| Category | Multimeter |
| DC Voltage Range | 100 mV to 1000 V |
| AC Voltage Range | 100 mV to 750 V |
| Frequency Range | 3 Hz to 300 kHz |
| Resistance Range | 100 MΩ |
| DC Current Range | 3 A |
| DC Current Accuracy | 0.05% |
| AC Current Range | 3 A |
| Display | 5.5 digit |
| Connectivity | GPIB |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz |
Describes the procedure to check DC voltage accuracy using a calibrator.
Details the process for verifying AC voltage accuracy at specific frequencies.
Details the procedure for checking resistance accuracy using a calibrator.
Explains the steps to verify the Model 2015's frequency measurement function.
Details the procedure to verify the total harmonic distortion measurement.
Explains how to access and enter the calibration code for unlocking.
Describes the process for calibrating multiple functions of the Model 2015.
Outlines the procedure for calibrating the DC volts measurement function.
Explains the steps to calibrate the resistance measurement function.
Describes how to calibrate the AC voltage measurement function.
Details how to set line voltage and replace the main power line fuse.
Explains the procedure for replacing the AMPS fuse for over-current protection.
Provides important advice and precautions before undertaking any repairs.
Explains how to remove the instrument's outer case cover.
