2: Front-panel overview DAQ6510 Data Acquisition / Multimeter System
2-10 DAQ6510-900-01Rev. A / April 2018
STATISTICS swipe screen
The STATISTICS swipe screen contains information about the readings in the active reading buffer.
When the reading buffer is configured to fill continuously and overwrite old data with new data, the
buffer statistics include the data that was overwritten. To get statistics that do not include data that
has been overwritten, define a large buffer size that will accommodate the number of readings you
will make. You can use the Clear Active Buffer button on this screen to clear the data from the
active reading buffer.
Figure 8: STATISTICS swipe screen
To Next Page
Loading...
