Where can I get the 2400 personality script?
The 2400 personality script allows the Series 2600B instrument
to accept Model 2400 SourceMeter SCPI commands. For more
information about loading and running the 2400 personality script,
see “Model 2400 emulation” in the Series 2600B Reference
Manual (document number 2600BS-901-01). You can get this
script from the Keithley Instruments website. Go to
tek.com/keithley and search for “TSP Script for Series 2600B
SMUs to Emulate Model 2400 SMUs.”
To copy the script to the 2600B, you can use a ash drive or any
remote command interface. If you use a ash drive, it must be
formatted as a FAT or FAT32 drive.
FAQs
Where can I nd updated drivers?
For the latest drivers and additional support information, see the
Keithley Instruments support website.
To see what drivers are available for your instrument:
1. Go to tek.com/keithley.
2. Select SUPPORT.
What should I do if I see an error message when I turn
the instrument on?
If an error message is displayed, press the EXIT (LOCAL)
key. The Series 2600B will return to the default display screen.
For detailed information about error messages, see “Errors
and status messages” in the Series 2600B Reference Manual
(document number 2600BS-901-01).
To Next Page
Loading...
Need help?
General
