Keller LEO 5 - Page 11

www.keller-druck.com
- 11 -
Backlight setting Resolution
selection
Accu information Exit
↓
↓
↓
The backlight can
be turn “ON”, “OFF”
or “ONOFF”
“ONOFF”
turn on the backlight
for 10 seconds after
key is pressed
set measurement
value resolution
between 0 to 4
decimal places
displays
accumulator voltage
and visualizes the
charge level.
3.2 Volt is an empty
- 4.2 Volt is a fully
charged
accumulator
sub menu can be
left by pressing
“ENTER” while
“EXIT” is displayed.
The display will
switch back to the
main menu