Keller LEO 5 - Peak Mode Operation Example

www.keller-druck.com
- 5 -
2.2.1 Example: Setting the peak mode
 Turn on the instrument by pressing the
SELECT key followed by pressing the
ENTER key
 Press the “SELECT”–key 3 times: The
lower display part will show “MENU”
 Press “ENTER”
 Press “SELECT” ”–key 3 times: The lower
display part will show “PEAK” and
“START”
 Press “ENTER”: In the main display, the
segment “PEAK” indicates that the peak
mode is on.
2.2.2 Handling example: How to stop the
peak mode
 Press “SELECT”–key 3 times: The lower
display part will show “MENU”
 Press “ENTER”
 Press “SELECT”–key 3 times: The lower
display part will show “PEAK” and “STOP”
 Press “ENTER”