www.keller-druck.com
- 3 -
1 General information
The LEO 5 is powered by accumulator and will be
charged when connected to USB Port. As the
accumulator is fix built in the device it cannot be
replaced.
2 Operating instructions
2.1 Touch Display
LEO 5 has two keys integrated into the display.
A key press is initiated by touching the key field
“SELECT” or “ENTER” and activated by release the
key for at least 0.5 second.
(release your finger from the display after touching,
for at least 1cm away from the display field)
Turn-on:
Touching the “SELECT” key turns on the display.
The device displays “PRESS ENTER”.
Touch “ENTER” to start the manometer.
To Next Page
Loading...
Need help?
General
