Kelly KLS4840D User Manual

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02
6
3.72V model: range of the batteries is 24V-72V.
Chapter 3 Wiring and Installation
3.1 Mounting the Controller
The controller can be oriented in any position which should be as clean and dry as possible,
and if necessary, shielded with a cover to protect it from water and contaminants.
To ensure full rated output power, the controller should be fastened to a clean, flat metal
surface with four screws. Applying silicon grease or some other thermal conductive material to
contact surface will enhance thermal performance.
Proper heat sinking and airflow are vital to achieve the full power capability of the controller.
The case outline and mounting holes’ dimensions are shown in Figure 1.
Figure 1:KLSD mounting holes’ dimensions (dimensions in millimeters)

Kelly KLS4840D Specifications

General

Brand	Kelly
Model	KLS4840D
Category	Controller
Language	English