Kelvion TEC1 - Evacuation; Fluid Cooler Protection; System Evacuation Procedure

21
Dual Orifice
Schraeder valve c/w
cap
Distributor cap
Gasket joint
264-475-70 (512E3)
264-475-80(512E4)
Nozzle assembly
Distributor
body
inlet connection
12. EVACUATION
Fluid coolers using water or water-based solutions must be protected by adding anti-freeze in sucient concentration, as it
is not possible to drain the system completely.
Note: The heat transfer properties of a fluid vary with the concentration of additives.
Evacuate the system in accordance with standard refrigeration operating procedures, codes and regulations