Kemper PROFILER - Toggling Effects On;Off with PROFILER Remote

12 PROFILER QUICKSTART
» Press QUICK and then press the button of an empty eect
module to bring it into focus.
» Turn the BROWSE knob to select one of the pre-installed
eect presets.
» Press EXIT to return to the home screen. Press QUICK again to
return to the edited module.
» Press the button of an eect module to activate or deactivate
the eect.
» Don’t forget to store the edited Rig.
TOGGLING EFFECTS ON/OFF WITH
PROFILER REMOTE
The PROFILER Remote oers four dedicated Eect Buttons (I to
IIII) to activate eect modules. Each can toggle a single module or
a combination of modules.
Delete Preset<-- Category
Delay
Wah
Shaper
Distortion
Quad Harmonic
Wah Wah
Wah Low Pass
Wah High Pass
Cae
Cry
Dlp Hendrix
Ibz Wh Ten
Category Type Preset
Autoload Auto Type