Kemper PROFILER - Volume Pedal Usage; Wah Pedal Setup

14 PROFILER QUICKSTART
VOLUME PEDAL
So-called “expression pedals”, which are optimized for digital devices like the PROFILER, should be used for all pedal
functions.
Connect your expression pedal to the PEDAL 1 input socket on the rear side of the PROFILER, or PEDAL 3 input on
your Remote. You will be able to control volume right away.
The functionality of the Volume Pedal, for example whether it is placed pre or post the amplifier, can vary by Rig.
Please find more information in a dedicated chapter about the Volume Pedal in the Main Manual.
When you bring your Volume Pedal down to heel position, the Tuner activates automatically, and you can tune your
guitar silently. This feature is optional and can be deselected in the Tuner Mode.
WAH PEDAL
Connect the expression pedal to PEDAL 2 of your PROFILER or PEDAL 4 of your Remote. From now on, this pedal
will control the expression of an eect. For instance, the position of your wah eect, or the pitch of pedal-pitch
eects, and also Morphing, which we will introduce in the next paragraph.
To complete this setup, you first need to dial up a wah eect in your current Rig. Now, bring an eect module into
focus as described in the above paragraph Adding Eects. Search for a wah preset by turning the BROWSE knob
and load it. The new eect will instantly respond to the pedal.