EasyManuals Logo
Home>Kemppi>Welding System>MasterTig MLS 3000 ACDC

Kemppi MasterTig MLS 3000 ACDC User Manual

Kemppi MasterTig MLS 3000 ACDC
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
EN
4.2 TROUBLESHOOTING
Power On light is not lit.
There is no power in the machine.
• Check mains fuses, replace blown fuses.
• Check mains cable and plug, replace defect parts.
The machine is not welding properly.
There are plenty of spatters during welding. Weld joint is porous or power supply is
insucient.
• Check welding settings and adjust if needed.
• Check gas ow and gas hose connection.
• Check that earth clamp is properly fastened and that earth cable has no defects. Change
the position if necessary and replace defect parts.
• Check welding torch cable and connector. Tighten the connection and replace defective
parts.
• Check the consumable parts of welding torch. Clean and replace defect parts.
• Check mains fuses, replace blown fuses.
Power source overheat indicator light is lit.
Power source is overheated.
• Check that there is enough free space behind the machine for cooling air circulation.
• Check cooling unit for water circulation, clean cooling unit lter and air grate. Add
cooling liquid if necessary.
For further information and assistance, contact your nearest Kemppi service workshop.
4.3 DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
5. ORDERING NUMBERS
Power sources
Mastertig MLS™ 3000 ACDC 6163000
Mastertig MLS™ 3003 ACDC 6163003
Mastertig MLS™ 3000 ACDC VRD 6163000VRD
Panels
ACS 6162805
ACX 6162804
20
MasterTig MLS 3000, 3003 ACDC / © Kemppi Oy / 1112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kemppi MasterTig MLS 3000 ACDC and is the answer not in the manual?

Kemppi MasterTig MLS 3000 ACDC Specifications

General IconGeneral
BrandKemppi
ModelMasterTig MLS 3000 ACDC
CategoryWelding System
LanguageEnglish

Related product manuals